Four-Shaft shredder is a multi-purpose shredder. It has the same working principle as two-shaft shredder. ZCE Series four-shaft shredder can control the final material size by equipping a screen at the outlet. Four-shaft fine shredder provides greater shearing force than two-shaft shredder, it can handle all kinds of toughness, ductility of waste materials and obtain consistent shape and size.
In general, four-shaft shredders are used for more difficult tasks, such as reducing large volumes of material to a small and uniform size in a single pass, while maintaining good throughput. The function of the two cutters above the four-shaft shredder is to clean the shafts below and at the same time provide a certain amount of shearing force. The ZCE Series four-shaft shredder has four sets of shear rolls with different tool configurations to match each other. Once inside the shredding chamber, the material is shredded into small pieces by the tearing and shearing action of the blades on the four sets of rolls. The size of the output material is controlled by the screen. After the material is cut once, the material with a smaller particle size than the hole of the screen is discharged from the lower part of the box under the action of gravity and squeezing pressure, while the material with a larger size than the hole of the screen is guided by the main cutters and the secondary cutters to return to the inner surface of the screen for the second cutting, and so on until the material can be discharged from the hole of the screen. ZC Ecotech offers a high performance heavy duty four-shaft shredder for large applications. It uses a high horsepower motor in combination with a large high speed ratio reducer, making it easy to cope with the disposal of bulky waste, car shells, non-ferrous metals, various industrial and hazardous waste.
When choosing a four roll shredder, multiple factors need to be considered to ensure the selection of the appropriate equipment. Here are some key purchasing points:
1. Understand the maintenance requirements and cycles of the equipment, and consider whether it is easy to carry out daily maintenance. This helps to reduce maintenance costs during equipment use and extend equipment lifespan.
Pay attention to the safety performance of equipment, including protective devices, emergency shutdown devices, etc. These safety devices can shut down the equipment in a timely manner in case of malfunction or abnormality, protecting the personal safety of operators.
3. Reasonably consider price factors while meeting the above requirements. But remember not to focus solely on affordability and overlook the quality and performance of the equipment.
4. Understand whether the supplier provides technical support and training services. This helps operators to quickly master the skills of using and maintaining equipment.
In summary, when choosing a four roll shredder, it is necessary to comprehensively consider multiple factors such as production capacity requirements, material characteristics, equipment performance, quality reliability, maintenance, safety performance, as well as price and technical support. By careful comparison and selection, one can choose high-quality four roll shredder equipment that suits their own needs.
Cutters with high wear resistance, moderate toughness, strong interchangeability and long service life.
Four sets of shearing cutter rollers with high efficiency cooperation to reduce ineffective gripping, reversing and idling time and high efficiency.
Intelligent monitoring system for automatic memory, data analysis, fault prediction, alarm stop and intelligent maintenance.
Easy to shred, high efficiency, customized according to demand, imported raw materials, and guaranteed quality.
The material enters the interior of the shredder box through the feeding system, which carries four sets of blades. The material is crushed into small pieces by the combined forces of blade tearing, squeezing, and shearing. When the size of the material is smaller than the sieve hole, it is discharged from the lower sieve hole of the box under the action of gravity and squeezing force. The larger material will continue to be crushed in the crushing chamber until the size is smaller than the sieve hole.
| Model | Capacity (t/h) | Output size (mm) | Dimension (mm) |
| ZCE13 | 1-6 | 50-150 | 3200×2000×3000 |
| ZCE15 | 2-10 | 4000×2000×3000 | |
| ZCE18 | 3-15 | 4500×2200×3200 |
*The output will vary according to different materials, feed particle size and other factors.
Company: Zhengzhou ZhongCheng environmental protection equipment co., LTD
Company address: 36 xueyuan road, Zhengzhou City, Henan Province, China.
Whatsapp:+86-18738194110
Our Email
Our phone
86-18738194110
86-18738194110
Save Time! Get A Detailed Quotation Quickly.
